mx920 ink Replacing an Ink Tank

Author: admin Sort: Canon Copier Toner Issue Time: 2017-11-16 11:45

When you need to replace anink tank, follow the procedure below.

(2)Hold theink tankwith the orangeprotective cap(C)pointing up while being careful not to block the Y-shape air hole(B).

Do not touch the metallic parts or other parts inside themachine.

When remaining ink cautions or errors occur, the message will appear on theLCDto inform you of the error.Take appropriate action according to the message.

Discard the emptyink tankaccording to the local laws and regulations regarding disposal of consumables.

If print results become int or white streaks appear despite sufficient ink levels, seeMaintenance Procedure.

If the error message appears after theink coveris closed, take appropriate action.

When you start printing after replacing theink tank, themachinestarts cleaning theprint headautomatically.Do not perform any other operations until themachinecompletes the cleaning of theprint head.

Do not touch other parts besides theink tanks.

Do not touch other parts besides theink tanks.

Color ink may be consumed even when printing a black-and-white document or when black-and-white printing is specified.

If the error message appears after theink coveris closed, take appropriate action.

(2)Press on the top of theink tankuntil theink tanksnaps firmly into place.

When you start printing after replacing theink tank, themachinestarts cleaning theprint headautomatically.Do not perform any other operations until themachinecompletes the cleaning of theprint head.

Handle anink tankcarefully.Do not drop or apply excessive pressure to it.

Do not touch the metallic parts or other parts inside themachine.

If theprint headis out of alignment, as indicated by misaligned printed ruled lines or similar symptoms, adjust the print head position.

Once anink tankhas been installed, do not remove it from themachineand leave it out in the open.This will cause theink tankto dry out, and themachinemay not operate properly when it is reinstalled.To maintain optimal printing quality, use anink tankwithin six months of first use.

If the orange tape remains on the Y-shape air hole(B), ink may splash or themachinemay not print properly.

For details on ink lamp flashing speed, seeChecking the Ink Status with the Ink Lamps.

Close theink cover, then close thedocument covergently.

To install a black pigment (PGBK)ink tank, insert it in the middle of the correct position with equal spaces on the left and right sides.

Remove theink tankwith the lamp flashing st.

To install a black pigment (PGBK)ink tank, insert it in the middle of the correct position with equal spaces on the left and right sides.

You cannot print if theink tankis installed in the wrong position.Be sure to install theink tankin the correct position according to the label on theprint head holder.

Do not touch the inside of the orangeprotective capor the open ink port.The ink may stain your hands if you touch them.

For information on the compatibleink tank, refer to the printed manual:Getting Started.

For details on ink lamp flashing speed, seeChecking the Ink Status with the Ink Lamps.

Handle theink tankcarefully to avoid staining of clothing or the surrounding area.

Discard the emptyink tankaccording to the local laws and regulations regarding disposal of consumables.

When opening or closing thedocument cover, do not touch the buttons andLCDon theoperation panel.Doing so may result in an unexpected operation.

Do not reattach theprotective caponce you have removed it.Discard it according to the local laws and regulations regarding disposal of consumables.

Handle theink tankcarefully to avoid staining of clothing or the surrounding area.

Do not touch the inside of the orangeprotective cap(C)or the open ink port(D).The ink may stain your hands if you touch them.

If print results become int or white streaks appear despite sufficient ink levels, seeMaintenance Procedure.

If the orange tape remains on the Y-shape air hole, ink may splash or themachinemay not print properly.

Do not remove two or moreink tanksat the same time.Be sure to replaceink tanksone by one when replacing two or moreink tanks.

Every ink is also consumed in the standard cleaning and deep cleaning of theprint head, which may be necessary to maintain the performance of themachine.When anink tankis out of ink, replace it immediately with a new one.

Do not push the sides of theink tank.If you push the sides of theink tankwith the Y-shape air hole blocked, ink may splash.

Theprint head holdermoves to the replacement position.

Do not reattach theprotective cap(C)once you have removed it.Discard it according to the local laws and regulations regarding disposal of consumables.

Do not hold theprint head holderto stop or move it forcibly.Do not touch theprint head holderuntil it stops completely.

Color ink may be consumed even when printing a black-and-white document or when black-and-white printing is specified.

For information on the compatibleink tank, refer to the printed manual:Getting Started.

Make sure that the power is turned on, then, holding both sides of the output tray, gently open it.

Do not push the sides of theink tank.If you push the sides of theink tankwith the Y-shape air hole(B)blocked, ink may splash.

Every ink is also consumed in the standard cleaning and deep cleaning of theprint head, which may be necessary to maintain the performance of themachine.When anink tankis out of ink, replace it immediately with a new one.

Use a newink tankfor replacement.Installing a usedink tankmay cause the nozzles to clog.Furthermore, with such anink tank, themachinewill not be able to inform you when to replace theink tankproperly.

If theprint headis out of alignment, as indicated by misaligned printed ruled lines or similar symptoms, adjust the print head position. canon ink tank printer canon pixma 3200 ink

When opening or closing thedocument cover, do not touch the buttons andLCDon theoperation panel.Doing so may result in an unexpected operation.

When you need to replace anink tank, follow the procedure below.

Make sure that the power is turned on, then, holding both sides of the output tray, gently open it.

If you remove anink tank, replace it immediately.Do not leave themachinewith theink tankremoved.

Handle anink tankcarefully.Do not drop or apply excessive pressure to it.

When opening or closing thedocument cover, do not touch the buttons andLCDon theoperation panel.Doing so may result in an unexpected operation.

You cannot print if theink tankis installed in the wrong position.Be sure to install theink tankin the correct position according to the label on theprint head holder.

Hold thedocument coverfirmly when closing it because it is heavy.

When remaining ink cautions or errors occur, the message will appear on theTake appropriate action according to the message.

(1)Insert the front end of theink tankinto theprint headat a slant.

You cannot print unless all theink tanksare installed.Be sure to install all theink tanks.

Remove theink tankwith the lamp flashing st.

Close theink cover, then close thedocument covergently.

Hold thedocument coverfirmly when closing it because it is heavy.

(3)Lift up the tab on the orangeprotective cap(C)to remove it off GENTLY.

If you remove anink tank, replace it immediately.Do not leave themachinewith theink tankremoved.

Once anink tankhas been installed, do not remove it from themachineand leave it out in the open.This will cause theink tankto dry out, and themachinemay not operate properly when it is reinstalled.To maintain optimal printing quality, use anink tankwithin six months of first use.

Do not hold theprint head holderto stop or move it forcibly.Do not touch theprint head holderuntil it stops completely.

(1)Take a newink tankout of its package, remove the orange tape () completely, then remove the protective film () completely.

You cannot print unless all theink tanksare installed.Be sure to install all theink tanks.

Use a newink tankfor replacement.Installing a usedink tankmay cause the nozzles to clog.Furthermore, with such anink tank, themachinewill not be able to inform you when to replace theink tankproperly.

Make sure that the position of theink tankmatches the label.

If theink coveris left open for more than 10 minutes, theprint head holdermoves to the right.In this case, close and reopen theink cover.

When opening or closing thedocument cover, do not touch the buttons andLCDon theoperation panel.Doing so may result in an unexpected operation.

If theink coveris left open for more than 10 minutes, theprint head holdermoves to the right.In this case, close and reopen theink cover.

Do not remove two or moreink tanksat the same time.Be sure to replaceink tanksone by one when replacing two or moreink tanks.mx920 ink Replacing an Ink Tank

Dongguan Huida Office Supplies Co., LTD Welcome your inquiries